Note: When ordering, please specify the length of the connecting rod "L"

Specification: Galvanized steel flattened toothed connecting rod, zinc alloy connector, PA roller.

Note: When ordering, please specify the length of the connecting rod "L"

Material: Zinc alloy matrix

Description: Fix the side panel

Material: carbon steel

Surface treatment: fixed back plate

Material: carbon steel

Material: carbon steel

L=525 (600 deep)/575 (600 deep)

Material: carbon steel

Material: carbon steel

Material: carbon steel

Material: carbon steel

Material: carbon steel

Material: cast iron

Description: Connect TS091 and TS092

Material: carbon steel

Description: Fixed TS091 or PS040

Material: carbon steel

Description: Fixed TS011

Material: PA

Description: Fix the mounting plate

Material: carbon steel

Description: Fix the bottom sealing plate

Material: carbon steel

Description: Fix the bottom sealing plate

Material: carbon steel

Description: Fixed side door panel or back panel

Material: Zinc alloy

Description: Tighten the TS003-A/B/C locking rod

Material: Zinc alloy

Description: Tighten LG002-3

Material: Zinc alloy

Description: Tighten the TS003-A/B/C locking rod

Material: carbon steel

Description: Fix TS003-A/B/C lock rod

Note: When ordering, please specify the length of the connecting rod "L"

Material: Specification: Galvanized steel adjustable flat lock rod.

Note: When ordering, please specify the length of the connecting rod "L"

Material: Specification: Galvanized steel adjustable flat lock rod.

Note: When ordering, please specify the length of the connecting rod "L"

Material: Specification: Galvanized steel adjustable flat lock rod.

Material: Zinc alloy substrate, handle

Description: The handle can be quickly opened, making installation convenient and fast

Note: The locking rod is equipped with TS003-A/TS003-B/TS003-C

Material: PA panel, zinc alloy lock core, slider

Explanation: 180 ° rotation to open and lock

Note: The locking rod is equipped with TS003-A/TS003-B/TS003-C

Material: Zinc alloy hinge, carbon steel pin accessory

Description: Can be opened at an angle of 130 °

Note: By default, there are no screws available, and screws are optional

Material: Zinc alloy hinge, carbon steel pin accessory

Description: Can be opened at an angle of 130 °

Note: By default, there are no screws available, and screws are optional

Material: carbon steel/stainless steel

Material: carbon steel (galvanized)/stainless steel

Material: carbon steel (galvanized)/stainless steel

Material: PA

Material: carbon steel (galvanized)/stainless steel

Material: Nylon

Material: PA

Material: carbon steel (galvanized)

L=425 (500 deep)/525 (600 deep)/725 (800 deep)

Material: carbon steel (galvanized)

Material: carbon steel (galvanized)

Material: carbon steel (galvanized)

Material: carbon steel (galvanized)

L=40/42/20

Material: EPDM

Material: carbon steel/stainless steel

Material: Zinc alloy

Material: Zinc alloy

Material: carbon steel/stainless steel

Feature Description: Connecting PS040

Material: Zinc alloy base, handle

Surface treatment: spray molded substrate, handle

Structure description: The handle can be quickly opened, making installation convenient and fast

Note: The lock rod can be equipped with LG002-1/LG002-2 button lock cylinder as an option

Material: Black PA

Material: Zinc alloy

Material: carbon steel/stainless steel

Material: Rubber

Surface treatment: sandblasting

Material: Zinc alloy

Description: Fixed LG002-1/LG002-2

Material: Zinc alloy lock core, transmission case, ABS panel, zinc alloy panel, carbon steel bolt transmission strip

Surface treatment: bright chrome plated lock core, blue white zinc plated steel bolt, transmission case components 7032 colors 7035 colors brushed mirror polished

Structure description: The handle rotates 90 ° to drive the transmission housing component to achieve opening or locking

Note: The default is not equipped with a pull rod

Material: PA (7032)

Applicability: Used to fix the side panel

Material: PA (7032)

Applicability: Used to fix the mounting plate

Material: PA

Applicability: Used to fix the mounting plate

Material: carbon steel/stainless steel

Description: Used to support PS008-3

Material: carbon steel/stainless steel

Description: Used to fix the mounting plate

Material: Zinc alloy/PA

Description: Connect PS041

Material: Zinc alloy hinge, carbon steel pin accessory, stainless steel

Description: Can be opened at an angle of 130 °

Note: By default, there are no screws available, and screws are optional

Material: carbon steel

Material: carbon steel

Material: carbon steel/stainless steel

Precision sheet metal processing

Precision sheet metal processing

Precision sheet metal processing

Precision sheet metal processing

Design the control system required by the customer based on their needs and provided parameters.

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock, transportation lifting ring (optional)

Steel plate thickness:

Box: 2.0, 3.0 (optional)

Door panels: 2.0, 3.0 (optional)

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock, transportation lifting ring (optional)

Steel plate thickness:

Box: 2.0MM

Door panel: 2.0MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock, transportation lifting ring (optional)

Steel plate thickness:

Box: 1.5, 2.0 (optional)

Door panel: 2.0MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock

Steel plate thickness:

Box: 1.2-1.5MM

Door panel: 1.5MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The platform is treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP55 (according to GB 4208-2017)

Standard configuration: front single (double) door, operating table, cabinet, mounting plate, door lock, sealing strip, hydraulic support

Steel plate thickness:

Box: 2.0MM

Door panel: 2.0MM

Operating table: 2.0MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The platform is treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP55 (according to GB 4208-2017)

Standard configuration: front single (double) door, operating table, cabinet, mounting plate, door lock, sealing strip, hydraulic support

Steel plate thickness:

Box: 2.0MM

Door panel: 2.0MM

Operating table: 2.0MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017) Standard configuration: door panel, box body, sealing strip, box cover screws, installation plate (optional)

Steel plate thickness:

Box: 1.2-1.5MM

Door panel: 1.5MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP55 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock

Steel plate thickness:

Box: 1.2-1.5MM

Door panel: 1.5MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. It can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock

Steel plate thickness:

Box: 1.5MM

Door panel: 2.0MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock, transportation lifting ring (optional)

Steel plate thickness:

Box: 1.5MM

Door panel: 2.0MM

The specific size depends on customer needs and can be customized

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The box and door panels are treated with phosphating primer, and the exterior is coated with powder. It can be divided into two types of textures: RAL7032 or RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP65 (according to GB 4208-2017)

Standard configuration: door panel, box, sealing strip, grounding kit, installation plate, door lock, transportation lifting ring (optional)

Steel plate thickness:

Box: 1.5, 2.0 (optional)

Door panel: 2.0MM, specific size according to customer requirements, customizable

Non standard products

Material: Cold rolled steel plate/stainless steel

Surface treatment: The cabinet is treated with phosphating primer, and the exterior is coated with powder. The color can be divided into two types of textures: RAL7032 and RAL7035. Stainless steel is generally treated with double-sided wire drawing. The installation plate is galvanized, and the specific color depends on customer needs

Protection level: IP55 (according to GB 4208-2017)

Standard configuration: front door, back panel, mounting plate, cabinet body, sealing strip, door lock, side panel (optional)

Steel plate thickness: frame: profile 1.5MM

Door panel: 2.0MM

Backboard and side panel: 1.5MM

Cabinet material: Made of national standard cold-rolled steel plate, high-grade stainless steel, and stainless steel SUS304L (food and beverage industry), SUS316L (medical drug industry), and SUS201 (economy stainless steel) can be selected. Compared to the 90 fold profile cabinet, it has higher air tightness, rigidity, and flexibility.

In terms of surface treatment: The steel plate, cabinet, base, and door surfaces are sprayed with plastic, and can be painted in any color according to needs. Stainless steel is generally treated with double-sided wire drawing.

Cabinet standard configuration: 16 fold profile frame, front door, installation plate, back plate, top plate, side plate, base, lifting ring, three-section galvanized incoming line bottom plate, a pair of punched flower beams, pull rod three-point double tooth lock, process handle lock, cabinet door equipped with galvanized square tube, reinforcing ribs, and polyurethane coated foam sealing strip.

Cabinet process characteristics and performance: Generally, a special mold machine is used to produce 16 fold profiles, which have high strength, high precision, and are not easily twisted or deformed. The top plate can be removed, the side plate can be disassembled, and it is suitable for any direction of cabinet combination. The door corner can be extruded using specialized corner forming equipment, which is round and beautiful, without the need for welding and polishing.

Cabinet protection level: dustproof and waterproof level IP55, mechanical impact protection level IK10.

Cabinet material: Made of national standard cold-rolled steel plate, high-grade stainless steel, and stainless steel SUS304L (food and beverage industry), SUS316L (medical drug industry), and SUS201 (economy stainless steel) can be selected.

Cabinet surface treatment: The steel plate, cabinet body, base, and door surfaces are sprayed with plastic, and can be painted in any color according to needs. Stainless steel is generally treated with double-sided wire drawing.

Cabinet standard configuration: 90 fold profile frame, front door, installation plate, back plate, top plate, side plate, base, lifting ring, three section galvanized incoming line bottom plate, one pair of punched flower beams, pull rod three point double tooth lock, process handle lock, cabinet door equipped with galvanized square tube, reinforcing ribs, and polyurethane coated foam sealing strip.

Cabinet process characteristics and performance: Generally, a specialized mold machine is used to produce 90% folded profiles, which have high strength, high precision, and are not easily twisted or deformed. The top plate can be removed, and the side panels can be disassembled, making it suitable for combined use with cabinets. The door corners can be extruded using specialized corner forming equipment, which is round and beautiful without the need for welding and polishing.

Cabinet protection level: dustproof and waterproof level IP55, mechanical impact protection level IK10.